Love Meter

A vintage coin-op love tester rebuilt with a Raspberry Pi and a real pulse sensor

A vintage coin-op love tester, rebuilt with a Raspberry Pi and a real pulse sensor.

I found an old coin-operated Love Meter cabinet with its electronics gone and rebuilt the inside. The original sign face, score categories and quarter mechanism are still there. Drop in a quarter or press the button, put your finger in the slot, and the machine “tests” you for about 30 seconds. Lights blink, the cabinet shakes, a voice comments on how it’s going and animations play on the screen. Then it gives you a score.

It really does read your heartbeat and how your finger sits in the sensor. The verdict is purely for laughs.

Scoring

Score Category
Below 65 Cold Fish
65–75 Dreamer
76–86 Lovable
87–100 Passionate
Over 100 Insatiable

Under 65, change of partner recommended.

Parts

  • Raspberry Pi 4 (main application)
  • Adafruit QT Py RP2040 (real-time I/O coprocessor)
  • Pulse Sensor Amped for the heartbeat reading
  • MPR121 capacitive touch with three rings around the finger opening
  • EYESPI SPI TFT display behind the original window
  • MAX98306 amp and a 3" speaker
  • L298N driver and a vibration motor to shake the cabinet
  • The original quarter mechanism, with a photo interrupter to detect coins
  • Normal/Spicy rocker switch and a volume knob

Tech and Features

  • Two controllers. The Pi runs a Python asyncio state machine for display, audio and scoring. The QT Py runs CircuitPython for sensors, LEDs and motor control, and streams readings to the Pi over USB serial.
  • Real input: heartbeat detection from the pulse waveform, plus capacitive sensing that knows when a finger is seated.
  • Two voice modes, Normal and Spicy, picked with a front-panel switch. Voice lines were generated with ElevenLabs.
  • Config-driven screens: scenes are defined in config files, with animated GIF playlists, outro screens and music that changes with the mode.
  • Fully offline. There’s no network and no remote updates.
  • Cabinet emulator: a browser-based emulator stands in for all the hardware, so the whole experience can be developed and tested away from the machine.